Rear Panel - Datavideo SE-2800 Quick Start Manual

Rear Panel

1 2
1. HD- SDI IN / HDMI IN (12CH)
2. HD- SDI IN / HDMI OUT / REMOTE CONTROL / CONSOLE
3. TALLY OUT
4. GPI
5. RS-422
6. DC IN
7. AUDIO OUT
8. AUDIO IN
HD- SDI IN / HDMI IN
The system consists of 3 input modules. Each module has 4 BNC
connectors and 1 HDMI connector.
There are 12 inputs altogether; part of them can be reconfigured. The
maximum number of inputs for a certain input format: 12 HD SDI,12
SD SDI, 6 CVBS, 3 HDMI.
Considering the above, it is possible to obtain the following
combinations, for example 10 HD SDI + 2 HDMI, or 3HD SDI+ 3 HDMI
+ 6 CVBS.
Besides, we reserve a possibility to switch signal from non-volatile
memory instead of 1 input in each input module, i.e. every input has
an alternative to the HD SDI signal.
It has been cleared up that inputs 1 & 2 are for CVBS, in 3 is for flash
static pictures, and in 4 is to HDMI; All the video/audio input signals
will be synchronized.
The SE-2800 has 2 modes HD- SDI IN (8CH or 12CH), if you want
upgrade 8CH to 12CH please update the SE-2800 firmware.
3
8
8 7
4 5 6