Datavideo SE-2800 Quick Start Manual page 13

HDMI IN EMB. AUDIO PAIR
-
Press the ENTER button and then press DOWN button select item 6 for HDMI IN EMB. AUDIO PAIR.
-
Press the RIGHT button and then press UP or DOWN button select INPUT4 / INPUT8 / INPUT12.
-
Press the RIGHT button into your select.
-
Press the UP or DOWN button to select your setting.
-
Press the ENTER button to confirm your setting.
OUTPUTS EMB. AUDIO PAIR
-
Press the ENTER button and then press DOWN button select item 7 for OUTPUTS EMB. AUDIO PAIR.
-
Press the RIGHT button and then press UP or DOWN button select OUT1 / OUT2 / OUT3.
-
Press the RIGHT button into your select.
-
Press the UP or DOWN button to select your setting.
-
Press the ENTER button to confirm your setting.
AUTO AUDIO MIXING TYPE
-
Press the ENTER button and then press DOWN button select item 8 for AUTO AUDIO MIXING TYPE.
-
Press the RIGHT button and then press UP or DOWN button select X-TYPE / Y-TYPE.
-
Press the RIGHT button into your select.
-
Press the UP button to select your setting.
-
Press the ENTER button to confirm your setting.
T-BAR AUDIO MIXING TYPE
-
Press the ENTER button and then press DOWN button select item 9 for T-BAR AUDIO MIXING TYPE.
-
Press the RIGHT button to select FOLLOW AUDIO MIXING TYPE / BY THE END.
-
Press the UP button to select your setting.
-
Press the ENTER button to confirm your setting.
PIP SETTINGS
-
Press the ENTER button and then press DOWN button select item 10 for PIP SETTINGS.
-
Press the RIGHT button and then press UP or DOWN button select POSITON PIP1 / SIZE PIP1 / BORDER
PIP1 / POSITON PIP2 / SIZE PIP2 / BORDER PIP2 or SET TO NOMINAL.
-
Press the RIGHT button and then press UP or DOWN button into your select.
-
Press the RIGHT button into your select.
-
Press the UP or DOWN button to select your setting.
-
Press the ENTER button to confirm your setting.
LOGO SETTINGS
-
Press the ENTER button and then press DOWN button select item 11 for LOGO SETTINGS.
-
Press the RIGHT button to select LOGO1 / LOGO2.
-
Press the RIGHT button and select X-POSITON / Y-POSITON.
-
Press the UP or DOWN button to select your setting.
-
Press the ENTER button to confirm your setting.
12