Displaying And Clearing Log Files - Cisco Nexus 3548 Configuration Manual

Displaying and Clearing Log Files

If the switch is restarted, the syslog server configuration changes that are kept in volatile memory might
Note
get lost.
Before You Begin
You must have configured one or more syslog servers.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Displaying and Clearing Log Files
You can display or clear messages in the log file and the NVRAM.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
78
Command or Action
switch# configure terminal
switch(config)# logging
distribute
switch(config)# logging commit
switch(config)# logging abort
switch(config)# no logging
distribute
switch# show logging pending
switch# show logging
pending-diff
switch# copy running-config
startup-config
Configuring System Message Logging
Purpose
Enters global configuration mode.
Enables distribution of the syslog server configuration to
network switches using the CFS infrastructure. By default,
distribution is disabled.
Commits the pending changes to the syslog server
configuration for distribution to the switches in the fabric.
Cancels the pending changes to the syslog server
configuration.
(Optional)
Disables the distribution of the syslog server configuration
to network switches using the CFS infrastructure. You cannot
disable distribution when configuration changes are pending.
See the logging commit and logging abort commands. By
default, distribution is disabled.
(Optional)
Displays the pending changes to the syslog server
configuration.
(Optional)
Displays the differences from the current syslog server
configuration to the pending changes of the syslog server
configuration.
(Optional)
Copies the running configuration to the startup configuration.