Creating User Accounts - Cisco Catalyst 3850 Hardware Installation Manual

Creating User Accounts

It may take up to three mins. You must complete the Day0 setup through the WebUI before using the device
terminal.
Step 4
Launch a Web browser on the PC and enter the device IP address (https://192.168.1.1) in the address
bar.
What to do next
Create a user account.
Creating User Accounts
Setting a username and password is the first task you will perform on your device. Typically, as a network
administrator, you will want to control access to your device and prevent unauthorized users from seeing your
network configuration or manipulating your settings.
Procedure
Step 1 Log on using the default username and password provided with the device.
The default username is cisco; the default password is the serial number of the switch chassis.
Step 2
Set a password of up to 25 alphanumeric characters. The username password combination you set gives you
privilege 15 access. The string cannot start with a number, is case sensitive, and allows spaces but ignores
leading spaces.
Catalyst 3850 Switch Hardware Installation Guide
88
Configuring the Switch
OL-26779-05