Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gold Medal Econo-Floss
Summary of Contents for Gold Medal Econo-Floss
- Page 1 ! " " # $ % " ! & '...
- Page 2 Part No. 42131 Revised: May 2004 Floss Machine Instruction Manual Model #3017, #3017SS AND #3077 Econo-Floss Floss-Maxx Cincinnati, OH 45241-4807 USA...
-
Page 3: Safety Precautions
Floss Machines Safety Precautions All Models #3017, #3017SS, and #3077... -
Page 4: Electrical Requirements
ELECTRICAL REQUIREMENTS The GOLD MEDAL Floss machine requires a 15 amp, 120 volt, 60 cycle electrical service. The power supply cord is equipped with a machine ground (the tubular prong on the male plug). -
Page 5: Operating Instructions
Floss Machines OPERATING INSTRUCTIONS The easiest way to make sure you have the right texture sugar with proper flavor and colors is to use GOLD MEDAL FLOSSUGAR. FLOSSUGAR gives good, rich colors and flavors, and does not exceed the color limitations imposed by the Food and Drug Administration. - Page 6 Floss Machines MAKING FLOSS Pick a cone; if it sticks in the stack of cones, twist it off the stack. Hold an inch or two of the pointed end of the cone between two fingers and a thumb. With a light flicking action, roll cone in the web of floss building up in the pan.
-
Page 7: Shutdown Procedure
Floss Machines FLOATER ADJUSTMENT In operation, the floss will collect on the FLOSS STABILIZER (if used). If the floss collects “low” on the stabilizer, twist the front (leading) edge of the leather floaters down. You get more lift and the floss will collect higher. -
Page 8: Maintenance Instructions
Floss Machines MAINTENANCE INSTRUCTIONS All Models #3017, #3017SS, and #3077... - Page 9 GOLD MEDAL Floss Ribbons (heat elements) are made of nickel wire with insulation at the terminal point and on the lead wires. They are designed to be as reliable as the GOLD MEDAL Floss Bands: however, the ribbons must be handled carefully. DO NOT stretch the ribbon or it will not function properly.
-
Page 10: Troubleshooting
Floss Machines TROUBLESHOOTING LOW PRODUCTION 1. Check for excessive carbon on the ribbons. Follow the instructions for removing and cleaning band and ribbon if needed. 2. Check heat control for correct setting. 3. Check the line voltage. A primary reason for low production and poor equipment performance is low line voltage. -
Page 11: Ordering Spare Parts
3. Please include your model name, serial number, and date of manufacture (located on the machine nameplate) with your order. 4. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 or, place orders at:... - Page 12 Floss Machines FLOSS MACHINE ASSEMBLY All Models #3017, #3017SS, and #3077...
- Page 13 Floss Machines PARTS LIST FLOSS MACHINE CABINET ASSEMBLY Model #3017 Model #3017SS Model #3077 Item # Part No. Part No. Part No. Description 47155 47155 47155 Molded Recessed Bumper (8) 22038 22038 22038 Power Supply Cord 67069 67069 67069 Handle (2) 42524 42524 42524...
- Page 14 Floss Machines PARTS LIST FLOSS MACHINE HEAD ASSEMBLY Model #3017 Model #3017SS Model #3077 Item No. Part No. Part No. Part No. Description 42283 42283 42561 Spinner Head Complete 42045 (2) 42045 (2) 42045 (4) 8-32 x 1/4 HX HD Whizlock 43166 43166 43166...
-
Page 15: Electrical Schematic
Floss Machines ELECTRICAL SCHEMATIC A.O. SMITH All Models #3017, #3017SS, and #3077... - Page 16 Floss Machines ELECTRICAL SCHEMATIC FASCO MOTOR All Models #3017, #3017SS, and #3077...
- Page 17 Floss Machines ELECTRICAL SCHEMATIC MARATHON MOTOR All Models #3017, #3017SS, and #3077...
-
Page 18: Warranty
Floss Machines WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...