Canon KJ10ex4.5B Operation Manual page 49

LENSES
FOCUS
MANU.
MANU. SERVO
Z00M REMOTE1/
VIRTUAL REMOTE2
Zoom Operation Change-over Knob
Zoom Rocker Seesaw
KJ10ex4.5B IASE A
■ Maximum Zoom Speed Volume
Max. Zoom Speed
Volume
Reference: Maximum zoom speed image graph
Amount by which the zoom rocker seesaw is
Pushing the switch
further down at the
wide position
NOTE
The maximum speed in servo zoom automatic playback operation is always set at the highest speed
regardless of the adjustment setting of the maximum zoom speed volume.
※ This adjustment can be performed on the information display.
Refer to the Information Display Manual.
ZOOM
SERVO
10
The servo zoom speed when the zoom rocker seesaw is pressed varies
according to how much the switch is pressed down. Pressing the switch
farther down makes the speed faster.
The speed when this switch is pressed all the way is the maximum zoom
speed.
The maximum zoom speed can be adjusted using the maximum zoom
speed volume. This also adjusts the speed over the entire range that the
switch is pressed down. (See the below.)
Maximum zoom speed
MAX
pushed down and zoom direction
1
Set the zoom operation change-over knob at the
bottom of the lens drive unit to "SERVO" position.
2
The zoom can be operated by pressing the zoom
rocker seesaw located on the top of the lens drive
unit.
Operation direction
The zoom speed changes according to how far
down the switch is pressed.
T urning the volume
clockwise
When the volume is turned
counterclockwise
T urning the volume
counterclockwise
Pushing the switch
further down at the
tele position
E15
5 OPERATION
↓
Zoom direction
Toward Wide side
Toward Tele side
When the volume is turned
clockwise