Switch Operations - Canon KJ10ex4.5B Operation Manual

5 OPERATION

5-6. SWITCH OPERATIONS

Four of the switches provided on the lens VTR, RET, AUX1 and AUX2 had the functions of "VTR", "RET",
"Shtl" and "FRM1" respectively allocated to them at the factory.
Alternative functions can be allocated to these switches to suit the ways in which the switches will be
used.
VTR Switch
A 2
AUX2 switch =
Default function: "FRM1"
Alternative functions: FRM1, FRM2, Sped, Shtl, NON, VTR, RET
RET switch =
Default function: "RET"
Alternative functions: RET, FRM1, FRM2, Sped, Shtl, VTR
RET Switch
R
A 1
AUX1 switch =
Default function: "Shtl"
Alternative functions: Shtl, NON, VTR, RET, FRM1, FRM2, Sped
V
VTR switch =
Default function: "VTR"
Alternative functions: VTR, RET, FRM1, FRM2, Sped, Shtl
■ VTR Switch
Press the VTR switch to execute the operation of
VTR and press it again to stop the operation of
VTR.
■RET Switch
While the RET switch is held down, on air picture/
being recorded picture can be seen in the
viewfinder.
E26
LENSES