Canon KJ10ex4.5B Operation Manual page 41

LENSES
2 NOMENCLATURE
3
2
1
※ AUX2
Function can be allocated.
See E26 for details.
4
5
6
AUX2
7
10
11
12
13
① Iris Gain Adjusting Trimmer
Adjusts the iris responce speed in Auto iris mode.
② Instant Auto-Iris Switch
While pressing this switch, automatic iris operation
instantly takes effect.
③ Iris Operation Mode Change-over Switch
Use this switch to change from manual to automatic or vice versa.
④ Zoom Rocker Seesaw
8
Use this rocker for servo zoom operation.
9
The zoom speed changes according to how far down the
rocker is pressed.
⑤ RET Switch (Video Return Switch)
While this switch is held down, on air picture/being
recorded picture can be seen in the viewfinder through
camera control system when multi cameras are conncted
to its system.
⑥ Memo Button (Memory Button)
Memorize the shuttle memory position and/or zoom speed
by pressing this button together with one of other buttons
(AUX1,AUX2,or Zoom Rocker Seasaw).
⑦ Flange Back Lock Screw/Flange Back
Adjusting Ring
Loosen this screw and turn this ring to adjust the back
focus.
⑧ Locating Pin
Determines the mounting position of the lens.
⑨ Macro Button/Macro Ring
Use this button and ring to shoot an object which is closer
than the M.O.D.
⑩ Extender Lever
2X built-in extender is in and out by swing of this lever.
⑪ Iris Ring
Turn the iris ring to operate the iris manually.
⑫ Zoom Lever/Zoom Ring
Use the zoom ring and zoom lever to operate the zoom
manually.
⑬ Focus Ring
Turn this ring to focus on the object.
E7
2 NOMENCLATURE