Fixed Seat Tilt; Freewheel Device (Fig. 8.3); Tyre Pressure - Sunrise Medical Quickie Q100 R General Manual

8.4 Fixed Seat Tilt:

The seat can be tilted and set manually within a range of
0°, 3° 6° (Fig.8.2).
• Loosen the two rear M10 bolts (1)
• Undo the 2 front wing screws (2)
• Move the seat to the desired tilt angle.
• Replace and tighten the 2 wing screws (2)
• Retighten the two M10 bolts (1) to 10/12Nm.
Fig. 8.2
1 2

8.5 Freewheel device (Fig. 8.3):

Pull brake release lever away from battery box so that it is
the freewheel position. If you wish to push the wheelchair
with the motors off, you should follow this procedure with
both wheels. When the levers are pushed inwards, the
drive wheel will automatically connect with the propulsion
mechanism. Follow this procedure with both wheels.

8.6. Tyre pressure:

Where pnuematic tyres are fitted, It is important to check
inflation pressure regularly, along with the state of wear of
the tyres. The maximum pressure recommended for the
front wheels is 36 psi (2.5 bars), while for the rear wheels
it is 40 psi (2.7 bars).
WARNING!
Never inflate the tyres with a service station air pump. It is
recommended that you use a manual pump or a pressure
regulator (manometer).
Fig. 8.3
27
Rev. A Q100R Q200R