Fitting The Lap Belt; Crutch Holder, (Fig.7.11); Lights And Indicators, (Fig.7.12-7.13) - Sunrise Medical Quickie Q100 R General Manual

WARNING!
The Lap Belt is a safety critical item. If you are unsure
about fitting it, please contact your approved Sunrise
Medical dealer.

7.7. Fitting The Lap Belt :

Fig.7.8
1) Remove Lap belt from bag, (Fig.7.8).
2) Fix the lap belt to the backrest bracket using the hole
provided, (Fig.7.9).
3) The Lap Belt should look like this when fitted, (Fig.7.10),
Fig.7.9
Fig.7.10

7.8 Crutch Holder, (Fig.7.11):

WARNING!
• Ensure that the crutch is securely fastened to the crutch
holder.
• Ensure that the crutch is not interfering with the
mechanisms of the chair.
• Ensure that the crutch does not protrude from the chair.
• Do not attempt to remove the crutch whilst the chair is
in motion.
• Always come to a complete stop and turn off the power
to the controls before attempting to remove the crutch.
This will avoid accidentally operating the chair.

7.9 Lights and indicators, (Fig.7.12-7.13):

Where fitted, ensure that the lights and indicators are
functioning correctly and lens are clean before going
outdoors at night.
Lights assemblies can become very hot - Care must be
taken if removing them for repair.
NOTE: Please contact your local Sunrise medical
approved servicing agent for any warranty, service or
repair work required.
Fig.7.11
Fig. 7.12
Fig. 7.13
25
Rev. A Q100R Q200R