Solid Back And Seat Insert; Seat Depth; Aa.seat Tilt; Bb.cross Brace Assembly - Sunrise Medical Zippie GS Owner's Manual

Hide thumbs Also See for Zippie GS:
Table of Contents

Advertisement

Z I P P I E G S
Y. SOLID BACK AND SEAT INSERT
40
1. Attaching/Removal
a) Position seat and back on the frame.
b) Position clamps on the seat base and backposts.
c) Insert the quick-release pins (A) through the mounting hole on the hook clamps.
d) Remove the seat by reversing the above process.
2. Attaching/Removal of Transit Option Back/Seat
a) Position seat and back on the frame.
b) Position clamps on the seat base and backposts.
c) Insert the quick-release pins (B) through the mounting holes on both the base and
backposts.
d) Remove the seat by reversing the above process.
Z. SEAT DEPTH
42
Adjustment
a) Remove the bolts securing the backrest pivot plate (C) onto the seat frame.
b) Position the backrest pivot plate in the pre-drilled holes on the frame.
c) Replace bolts and tighten securely.
NOTE:
This adjustment may also require repositioning the seat-to-back bracket (under the solid seat) into
the second set of mounting holes.
AA. SEAT TILT
42
Adjustment
a) Remove the rear bolts (C) from the backrest pivot plate.
b) Tilt the back posts to the desired tilt position.
c) Replace and tighten bolts.
BB. CROSS BRACE ASSEMBLY
Adjustment
a) Remove the four bolts (D) that attach the cross brace to the side frames.
b) Move the cross brace to the desired location on the tabs (E).
c) Replace and tighten the bolts.
NOTE:
Align the bolts through holes in the tabs that correspond on each side. Re-tighten bolts to 100 in.-
lbs. Cross braces have 2" of width growth.
CC. STRUT TUBE ASSEMBLY
NOTE:
Strut Tubes are installed on rigid chairs.
1. Width Adjustment
a) Remove the saddle bolts (F) from each end of the strut tubes (G) for all three strut
tubes.
b) Slide the adjustable extension to the desired width.
c) Replace and tighten the saddle bolts
in the strut tubes.
NOTE:
Strut tubes have 2" width adjustment available. Size changes may require a larger seat insert and
footplates. Call your authorized Sunrise supplier for details. Use a torque setting of 100 in.-lbs.
when making this adjustment.
40
41
41
43
44
21
40
A
41
B
42
C
43
E
D
D
44
G
F
I X .
930377 Rev. F

Advertisement

Table of Contents
loading

Table of Contents