What's In The Box; Placement - REVELL CONCERTa M8 SP2 Owner's Manual

WHAT'S IN THE BOX

Please verify that the package contains the following items, depending on which Revel
M8 Multi-Pack you have purchased. Please note that the hex wrench may be tucked under
the rubber foot pads.
M8 SP2 MULTI-PACK:
• 2 – M8 Satellite Loudspeakers
• 2 – Wall Mount Brackets
• 4 – Wall Mount End Cap Plates
• 2 – Rubber Foot Pads
• 1 – Hex Wrench
• 1 – Owner's Manual
M8 SP5 MULTI-PACK:
• 4 – M8 Satellite Loudspeakers
• 5 – Wall Mount Brackets
• 1 – M8 Center Channel Satellite Loudspeaker
• 1 – Center Channel Base Support Stand
• 10 – Wall Mount End Cap Plates
• 4 – Rubber Foot Pads
• 1 – Hex Wrench
• 1 – Owner's Manual
x1
NOT INCLUDED:
• Each wall bracket requires four #10 wood screws of 1-1/2 inch
(3.5 CM to 4 CM) in length
• Each M8 loudspeaker is connected to your audio system via speaker wire.
Use high-quality speaker wire to make your connections. 18-Gauge speaker
wire with polarity coding is recommended. For longer distances, 16-gauge or
heavier wire is recommended.
Revel Concerta M8 SP2/SP5
Owner's Manual
x2 x2
x4 x2 x1 x1
x2 x2
x1
x10 x4 x1 x1

PLACEMENT

Regardless of whether you have the Revel M8 SP2 or SP5 multi-pack, position your
speakers so that the left and right front speakers are each placed approximately
60-degrees from the listening position, as shown in Figure 1 and Figure 4.
Left
Center
Front
Channel
Channel
(above or below
video screen)
Listening Position
Left
Surround
Channel
Figure 1: This overhead view shows a typical
wall mounted 5-channel home theater plan.
SP2 STEREO CONFIGURATION
Before deciding where to place your speakers, survey your room and think about
placement, keeping the following points in mind, using Figure 1 as a guide:
• Position each speaker so that the it is approximately at ear level
• Refer to the "Home Theater Configuration" section below if you plan to use
the speakers as part of a home theater system
SP5 HOME THEATER CONFIGURATION
Refer to Figure 1 and Figure 4 for speaker placement in a home theatre surround
configuration. Place the speakers on the included brackets (refer to the "Wall Mounting"
section below), or on bookshelves or table stands alongside the listening position.
Final placement depends on room acoustics, availability of space, and your listening
preference.
Left and Right Front Speakers – Position one speaker on the left and another on the
right, along either side of the television monitor.
Center Speaker – The dedicated center channel speaker is designed to be placed
either just above or below your TV/video monitor. You can place the center speaker
on the included center speaker base support stand. If you choose to wall mount the
center channel speaker to the wall instead of using its base support stand, please refer
to the "Wall Mounting" section below. Note: the center speaker should be positioned
horizontally (Figure 2), while all other M8 speakers should be positioned vertically.
Figure 2: This example shows the M8 mounted on its bracket above a
television and, alternatively, placed on its base above the television.
Right
Subwoofer
Front
Channel
Right
Surround
Channel
3