Table of Contents
Advertisement
documentAtion conventionS
This document contains general safety, installation and operation
instructions for the Revel
C783, C583, C383, C763, C563, C363,
®
C563DT, C363DT in-ceiling loudspeakers. It is important to read
this document before attempting to use this product. Pay particular
attention to:
WARNING: Calls attention to a procedure,
practice, condition or the like that, if not
correctly performed or adhered to, could result
in injury or death.
CAUTION: Calls attention to a procedure, practice,
condition or the like that, if not correctly performed or
adhered to, could result in damage to or destruction of part
of or the entire product.
Note: Calls attention to information that aids in the
installation or operation of the product.
2
About Revel
in-ceiling SpeAkeRS
®
Since the first Revel
speakers in 1996, Revel products have stood at
®
the forefront of loudspeaker design and performance. Revel in-ceiling
loudspeakers draw upon the same research, resources and unique
perspective that put all Revel loudspeakers in a class by themselves.
Revel in-ceiling loudspeakers provide unparalleled value and are known
for their standard-setting low sonic coloration and their freedom from
distortion over an extraordinarily wide dynamic range.
in-ceiling loudSpeAkeR HigHligHtS
• Long-throw woofers with cast frames and rubber surrounds provide
high output with low distortion.
• 1-inch (25mm) angle-adjustable, metal-dome tweeter with an
integrated waveguide provides optimized response both on and off
axis.
• High-order crossover network with premium-quality components
delivers extraordinarily accurate timbre reproduction.
• Boundary compensation switch (C783/C763) lets you adjust the
speaker to maintain tonal accuracy when the speaker is placed near
a wall.
• Three-position tweeter level control (C783/C763/C583/C563)
lets you adjust for optimum response in a variety of acoustical
environments, or for using the speakers without grilles.
pRoduct RegiStRAtion
Please take a moment to register your product on our Web site at www.
revelspeakers.com. You'll enable us to keep you posted on our latest
advancements and help us to understand our customers and build
products that meet their needs and expectations.
box contentS
Your Revel in-ceiling loudspeaker box should contain the following
items:
1 x Revel in-ceiling loudspeaker
1 x round grille
1 x square grille
1 x extra scrim cloth for round grille
1 x extra scrim cloth for square grille (with attached foam pads)
1 x mounting template
1 x instruction manual
unpAcking tHe SpeAkeR
Carefully unpack the speaker. If you suspect damage from transit, report
it immediately to your dealer and/or delivery service. Keep the shipping
carton and packing materials for future use.
inStAllAtion conSideRAtionS
Your new Revel loudspeakers have been engineered to provide
extremely accurate performance. However, any speaker's ultimate
performance will be affected by the speaker's placement in the listening
room and the acoustics of the room. Not all listening spaces can
accommodate the ideal conditions of these two factors. Therefore,
careful attention to the placement of your Revel in-ceiling loudspeakers
will have a significant impact on the general performance of the
loudspeakers.
In-Ceiling Architectural Loudspeaker
Instruction Manual
Advertisement
Table of Contents
