Advertisement
14
en | Install for an EXTEGRA IP 9000 FX camera
6
Install for an EXTEGRA IP 9000 FX camera
To install the Fiber Optic Media Converter Module (VG4-SFPSCKT) inside an EXTEGRA IP 9000
FX camera, complete the following steps.
1.
Note: For details about remove the camera sled from the housing, refer to the instructions in
the camera Installation Manual.
1.
2016.07 | 2.0 | F.01U.134.924
Remove the three (3) screws that hold the RJ45 coupler assembly in place inside the
EXTEGRA camera. Remove the RJ45 coupler assembly.
Push down the wires (item 1 in the following figure) to prevent the fiber optic board from
crimping the wires.
Installation Manual
Fiber Optic Ethernet Media Converter Kit
Bosch Security Systems
Advertisement
