Advertisement
Fiber Optic Ethernet Media Converter Kit
Figure 4.3: Attach base plate to power supply box
7.
Figure 4.4: Move bale clasp up
8.
Bosch Security Systems
Insert the SFP module into the VG4-SFPSCKT module:
Note: The SFP module is static sensitive. Use static handling procedures when installing
or removing the module.
–
Ensure that the bale-clasp on the SFP module is up.
–
Line up the SFP module with the port on the VG4-SFPSCKT module and slide it into
the port until you hear the catches engage.
Attach the supplied power harness (black) to its connector on the fiber optic module.
Installation Manual
Install for an AUTODOME camera | en
2016.07 | 2.0 | F.01U.134.924
11
Advertisement
