Advertisement
10
en | Install for an AUTODOME camera
5.
Figure 4.2: Placement of standoff pins between base plate and fiber optic module
6.
2016.07 | 2.0 | F.01U.134.924
Align the standoff pins to the anchor holes on the base plate and on the fiber optic
module, with the standoff pins in between the base plate and the fiber optic module, as
illustrated in the following figure. Press the base plate and the fiber optic module onto
the standoff pins until secure.
Install the fiber board (attached to the metal base plate) in the power supply box as
illustrated in the following figure. Secure the plate using the two screws.
Installation Manual
Fiber Optic Ethernet Media Converter Kit
Bosch Security Systems
Advertisement
