Advertisement
12
en | Install for an AUTODOME camera
9.
10. Route the appropriate fiber optic cable through the conduit hole (2) on the power supply
Figure 4.5: Route cable into power supply box
11. Plug the fiber optic cable (LC or SC connector) into the SFP module inside the power
12. Close and secure the power supply box.
13. Restore the power to the power supply box.
2016.07 | 2.0 | F.01U.134.924
Connect the RJ45 Ethernet patch cable (blue) to its socket on the fiber optic module.
Attach the other end to the female mating connector in the AUTODOME pendant arm.
Note: If installing a Pipe- or Roof-mounted camera, you must install Ethernet cable (with
RJ45 connectors) long enough to connect the camera and the power supply box.
box that is aligned with the VG4-SFPSCKT module (1).
supply unit.
Installation Manual
Fiber Optic Ethernet Media Converter Kit
Bosch Security Systems
Advertisement
