Chapter 4. Hotkey Operation
Hotkey Steps
List Current KVM Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page
window.
2. Invoke HSM (see page 40).
3. Press and release [F4] to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 40).
2. Press and release [F5]
Video DynaSync
The CM1164A is built with Video DynaSync, ATEN's exclusive technology
of storing a console monitor's EDID to eliminate boot-up display problems and
optimize resolution when switching between ports.
Port Switching
To switch to another computer, do the following:
1. Invoke HSM (see page 40).
2. Press the port number [1], [2], [3], or [4] and [Enter].
45