Console Login - Hyperterminal - ATEN CM1164A User Manual

4-port usb dvi multi-view kvmp switch

Hide thumbs Also See for CM1164A:

Table of Contents

CM1164A User Manual

Console Login - HyperTerminal

Once a physical connection from the computer to the CM1164A has been

made, you can establish a HyperTerminal session using the instructions below.

1. Open the HyperTerminal application and the COM1 Properties screen.

2. Configure the port settings for the COM1 port to the following:

Bits per Second: 19200

Data Bits: 8

Parity: None

Stop bits: 1

Flow Control: None.

3. When configured correctly, log in using the password password.

Table of Contents