Table of Contents
Advertisement
Installation
Approved Vent
Use 6-5/8" (168mm).Diameter Simpson Dura-Vent Direct-Vent Pro (or GS)*. See Approved Vent Configurations on
page 14 – 15 for details.
* Other vent may be approved with this stove. Check with the vent manufacturer for details.
Installation instructions for Simpson Dura-Vent may be found at www.duravent.com
Vent Installation
•
Slide the vent sections together and turn 1/4 turn until the sections lock in place.
•
Screws are not required to secure the vent. However, three screws may be used to secure vent
sections together if desired.
•
Horizontal sections require a 1/4" (6.4mm) rise every 12" (305mm) of travel
•
Horizontal sections require non-combustible support every three feet (e.g.: plumbing tape)
© Travis Industries
(for qualified installers only)
4/20/2018 - 1461
13
Northfield MV
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Northfield MV and is the answer not in the manual?