Changing Time Phases - Viessmann VITODENS Operating Instructions Manual

Operation
Time program
(cont.)
9. to exit the time program

Changing time phases

Example:
For Monday you want to change the start point of
time phase 2 to 19:00 h.
Tap the following on-screen buttons:
01. "Menu"
02. "Heating"
03. Heating circuit 2
04. "Time program, heating"
05. "Mo"
06. "Change"
07. for time phase 2
Deleting time phases
Example:
For Monday you want to delete time phase 2.
Tap the following on-screen buttons:
01. "Menu"
02. "Heating"
03. Heating circuit 2
04. "Time program, heating"
05. "Mo" for the required day
06. "Change"
07. for time phase 2
Energy cockpit
You can call up the following information about the
heating system's energy situation in the energy cock-
pit:
Current temperatures of the solar thermal system (if
■
installed in the system)
■ Energy yield of the solar thermal system for the last
2 years in various time segments
16
08. for the start point of time phase 2. The bar in the
time diagram is adjusted.
09. OK to confirm
Fig. 9
10. to exit the time program
08. to delete the time phase
Fig. 10
09. OK to confirm
10. to exit the time program
■ Energy statement of the heating system in conjunc-
tion with the solar thermal system for the last 2 years
in various time segments
Temperatures and heat-up condition of the DHW cyl-
■
inder
■ Energy consumption of the heat generator (gas and
electricity consumption)