Opening the control unit
Fig. 1
Programming unit
You can change any settings on your heating system
centrally at the programming unit of the control unit.
If remote control units are installed in your rooms, you
can also adjust the settings at the remote control units.
Remote control operating instructions
If there has not been any operation for some time, a
screensaver appears:
Fig. 2
Standard menu
In the standard menu, you can choose between 3 dis-
play areas:
Default display "Heating"
■
Energy cockpit
■
■
Favourites
If you want to permanently select a default display, see
page 33.
Call up the standard menu as follows:
■
If the screensaver is active:
Tap anywhere on the screen.
■
If you are in the main menu:
Tap
.
3°
0°
2 control levels are available:
■
The standard menu: See page 11
■
The main menu: See page 13
The programming unit is equipped with a
touchscreen. To make settings and scan for informa-
tion, tap the on-screen buttons.
The default display appears on the screen.
Use / to go to the energy cockpit or favourites.
Default display "Heating"
In the default display (see fig. 3), you can adjust and
call up the settings used most frequently:
Set room temperature
■
Operating program
■
Comfort mode
■
■
Economy mode
Operation
11