Operation
Procedure for setting a time program
08.
for the "Start" and "End" of time phase 2.
Fig. 7
The bars in the time diagram are adjusted.
Copying the time program to other days of the week
The procedure is explained using the example of cen-
tral heating for heating circuit 1 in weather-compensa-
ted operation.
Example:
You want to copy the "Monday" "Time program" over
to "Thursday" and "Friday".
Tap the following on-screen buttons:
1. "Heating circuit 1
Changing time phases
The procedure is explained using the example of cen-
tral heating for heating circuit 1 in weather-compensa-
ted operation.
Example:
For "Monday", you want to change the start point
"Start"of time phase 2 to 19:00 h.
Tap the following on-screen buttons:
1. "Heating circuit 1
2.
3. "Mo"
Deleting time phases
The procedure is explained using the example of cen-
tral heating for heating circuit 1 in weather-compensa-
ted operation.
Example:
For Monday you want to delete time phase 2.
20
(cont.)
" in the menu bar
" in the menu bar
09.
"Comfort" to select comfort room temperature.
10.
to confirm
11.
to quit the "Time program".
2.
3. "Mo"
4.
5. "Th", "Fr"
6.
to confirm
7.
to quit the time program.
4.
5.
for time phase 2
6.
for the start point of time phase 2.
The bar in the time diagram is adjusted.
7.
■
"Normal" for standard room temperature
or
"Comfort" for comfort room temperature
■
8.
to confirm
9.
to quit the time program.
Tap the following on-screen buttons:
1. "Heating circuit 1
2.
" in the menu bar