Calling Up Information - Viessmann VITODENS Operating Instructions Manual

Checks

Calling up information

Subject to the components connected and the settings
made, you can call up current temperatures and oper-
ating conditions.
Information in the main menu is split into groups:
■ "General"
■ "Heating circuit 1"
■ "Heating circuit 2"
"Heating circuit 3"
■
"DHW"
■
■ "Solar"
■ "Reset data"
■ "Service, contact details"
DHW cylinder temperature curve
Subject to the type of DHW cylinder, the temperature
curve is displayed graphically.
Temperature curves are shown for the individual test
points in the DHW cylinder.
Tap the following on-screen buttons:
1. "Menu"
2. "Information"
DHW cylinder temperature stratification
Subject to the type of DHW cylinder, the temperature
stratification is displayed graphically.
Tap the following on-screen buttons:
1. "Menu"
2. "Information"
3. "DHW"
Calling up the solar energy yield in conjunction with solar thermal systems
Only in connection with solar control unit, type SM1. In
conjunction with a Vitosolic solar control unit, you can
call up the solar energy yield on the Vitosolic.
Tap the following on-screen buttons:
1. "Menu"
2. "Information"
Calling up contact details for your heating contractor
Tap the following on-screen buttons:
1. "Menu"
34
Note
If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is dis-
played.
Detailed options for scanning individual groups can be
found in chapter "Scanning options".
Tap the following on-screen buttons:
1. "Menu"
2. "Information"
3. "DHW"
4. "Cylinder bar chart"
5. Required period
You can call up the following periods:
24 hours
■
■ 7 days
■ 30 days
4. "Cylinder, temperature stratification"
5. Required period
You can call up the following periods:
■ 24 hours
■ 7 days
30 days
■
3. "Solar"
4. "Solar energy bar chart"
Note
For further scanning options, e.g. for the solar circuit
pump hours run, see the extended menu under "Infor-
mation" in the "Solar" group.
2. "Information"