Caple C815C Instruction Manual page 22

B C
rew bracket Screw hole base
ADJUSTING THE BRACKET POSITION
djust the bracket position to suit for different work surface's thickness.
Fix the hob to the work surface by screwing 4 brackets on the bottom of hob (see
picture) after installation. Adjust the bracket position to suit different worktop
thicknesses.
HOB
aution
CAUTIONS:
- The ceramic hob should not be mounted next to cooling equipment, dishwashers
The ceramic hob must be installed by qualified personnel or technicians. We have professionals at your servi
and rotary dryers.
ease never conduct the operation by yourself.
- The wall and cooking zone above the work surface must withstand heat.
The ceramic hob must not be mounted to cooling equipment, dishwashers and rotary dryers.
- To avoid any damage, the worktop sandwich layer and adhesive must be heat
The hob must be installed such that better heat radiation can be ensured to enhance its reliability.
resistant.
The wall and induced heating zone above the work surface must withstand heat.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
A steam cleaner is not to be used.
Please keep this instruction manual for future reference
22 Instruction manual C815C
D
WORK SURFACE
BRACKET
A
HOB
BRACKET
15
WORK SURFACE
B