Related Manuals for Caple C811C
Summary of Contents for Caple C811C
-
Page 3: Instruction For The User
INSTRUCTION FOR THE USER All operation relative to installation and electric connection should be carried out by skilled personnel in conformity with the regulations in force. The specific instruction are described in the booklet section intended for the installer NOTICE configuration software. - Page 4 INSTRUCTION FOR THE USER The locking function can be activated when the heat shows in the associated display. cooking levels are activated or when the cook top is An element turned off by the thermal protection can off. If the cook top is on, the Key Lock function locks only be re-activated when the temperature falls below all the sensors except the On/Off (Key 6) general 89°C.
- Page 5 INSTRUCTION FOR THE USER When we touch the keys (8) of the timer the first time, ● Alarm mode: when the programmed period is over, it will appear “t” in each heating element display the alarm is activated although the timed heating waiting you selection.
- Page 6 INSTRUCTION FOR THE USER (7) should be switched off) select a power setting (1) sensors of the chosen heating element. (1) other than 0 for the fixed timed heating element, then set the timer value. Timer mode: once the heating element has been When this mode is selected, the decimal point on selected, the “t”...
-
Page 7: Instruction For The Installer
INSTRUCTION FOR THE INSTALLER The operations indicated below must be followed by qualified personnel exclusively, in conformity with the regulations in force. The manufacturing firm refuses all responsibility for damages to people, animal or things, resulting fron the failure to comply with such provisions. INSTALLATION ATTENTION The appliance is designed to be embedded into...