Table of Contents
Advertisement
INSTALLATION
Cut out the work surface according to the sizes shown in the drawing. For the
purpose of installation and use, a minimum of 50mm space must be left around the
hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-
resistant work surface material to avoid deformation caused by the heat radiation
from the hob. See below:
L (mm)
W (mm)
590
520
WARNING:
Always ensure the hob is well ventilated and the air inlet and outlet are not
blocked. Ensure the ceramic hob is in good working order. See below:
A (mm)
B (mm)
760
50 (min)
NOTE:
For safety, the distance between the hob and the cupboard above should be at
least 760mm.
Please keep this instruction manual for future reference
20
Instruction manual C815C
H (mm)
D (mm)
55
51
C (mm)
D
20 (min)
Air intake
A (mm)
B (mm)
564
494
E
Air exit (5mm)
X (mm)
50 (min)
Advertisement
Table of Contents
