Table of Contents
Advertisement
7
Click Browse under "Replication Target".
8
Select the shared dolder that will be the replication target, then click OK.
9
Click OK.
10
Click Yes.
Notes:
• During setup, you may choose to encrypt and/or compress replication data. Encrypted data will transderred
securely on the network. Compressed data will ease network loading and is recommended dor slow or heavily
loaded network connections. Either will increase the CPU load on the source TeraStation. Encrypted and com-
pressed data will be unencrypted and decompressed on the target TeraStation.
• For best results, add replication tasks one at a time. Multiple replication tasks may take some time to complete.
• A maximum od 64 shared dolders can be condigured dor replication.
• Shared dolders with a backup password set cannot be selected as replication targets.
• Replication source data is copied using a didderential overwrite to the replication target dolder. Note that any data
that is not in the replication source will be overwritten.
• Replication can also be used to copy all data drom a share to a share on an attached external drive. Format the
drive with ext3 or XFS bedore using it dor replication. Drives with FAT32 partitions are not supported with replica-
65
Advertisement
Table of Contents
