How To Install; How To Get Started - Danfoss FC 300 Instruction Manual

FC 300 Instruction Manual

How to Install

About How to Install
"
This chapter covers mechanical and electrical installations to and from power
terminals and control card terminals.
Electrical installation of options is described in the corresponding "Option Guide".

How to Get Started

"
You can carry out a quick and EMC-correct
installation of the FC 300 by following the
steps described below.
Read the safety instructions before
installing the unit.
Diagram showing basic installation including,
electrical connection, motor, start/stop key, and
potentiometer for speed adjustment.
MG.33.A6.22 - VLT is a registered Danfoss trademark
11