Troubleshooting; Environmental Protection - Worx WX255.1 Original Instructions Manual

TROUBLE SHOOTING
Problem
Battery will not charge
Switch cannot be pressed
Driver stops during driving
screws
Bit Cartridge will not rotate
when Cover slides.
16

ENVIRONMENTAL PROTECTION

Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling advice.
Possible cause
1. Charger not plugged into a
working outlet.
2. Surrounding air temperature
is too hot or too cold.
Forward/Reverse switch at
middle position
Driver battery is out of power
The cover is not fully open
Solution
1. Plug charger into a working outlet. Check cur-
rent by plugging in a lamp.
2. Move charger to an appropriate place which
temperature is suitable for the charger.
Make sure switch is on Forward or Reverse rota-
tion according to project need.
Make sure the driver is fully charged before
using it.
Make sure the Cover is fully open and past the
red line on the tool.