Worx WX252 Safety And Operating Manual
Original instructions
Hide thumbs
Also See for WX252:
- Original instructions manual (221 pages) ,
- Manual (153 pages) ,
- Safety and operating manual (16 pages)
Related Manuals for Worx WX252
Summary of Contents for Worx WX252
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS WX252...
- Page 4 10 9 8 7 6 5 4 3 2 1...
-
Page 6: Technical Data
ON / OFF SWITCH LED SIGHT LIGHT DRIVING BIT Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA WX252 (250-269- designation of machinery, representative of Cordless Screw Driver) Type Charger voltage 100-240V~50/60Hz Rated voltage Max* Battery capacity 1.5Ah lion battery... -
Page 7: Noise Information
NOISE INFORMATION A weighted sound pressure : 55dB(A) A weighted sound power : 66dB(A) &K 3.0dB(A) 80dB(A) Wear ear protection when sound pressure is over VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a = 1.113m/s²... - Page 8 WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job.
-
Page 9: Work Area Safety
GENERAL POWER TOOL SAFETY WARNINGS increase the risk of electric shock. Do not abuse the cord. Never use the cord for WARNING: Read all safety warnings and all carrying, pulling or unplugging the power tool. instructions. Failure to follow the warnings and Keep cord away from heat, oil, sharp edges instructions may result in electric shock, fire and/or or moving parts. - Page 10 turning the power tool on. A wrench or a key left or binding of moving parts, breakage of parts and any other condition that may affect the attached to a rotating part of the power tool may power tool’s operation. If damaged, have the result in personal injury.
- Page 11 Recharge only with the charger specified by conductive materials. When power tool is not WORX. Do not use any charger other than that specifically provided for use with the in use, keep it away from other metal objects, like equipment.
- Page 12 SYMBOL Don’t use double end bit Don’t stare directly into the tool holder. Do not dispose of batteries, Return exhausted batteries to your local To reduce the risk of injury, user collection or recycling point. must read instruction manual. This product has been marked Warning with a symbol relating to removing electric and electronic waste.
-
Page 13: Intended Use
OPERATING INSTRUCTIONS Operation NOTE: Before using the tool, read the instruction Operating the On/Off Switch book carefully. WARNING: Do not operate for long periods at low speed See Fig. G INTENDED USE because excess heat will be produced The power tool is intended for driving in and loosening internally. -
Page 14: Troubleshooting
TROUBLE SHOOTING Problem Possible cause Solution Battery will not charge 1. Charger not plugged into a work- 1. Plug charger into a working ing outlet. outlet. Check current by plugging in a lamp. 2. Surrounding air temperature is 2. Move charger to an appropriate too hot or too cold place which temperature is suitable for the charger. -
Page 15: Declaration Of Conformity
DECLARATION OF CONFORMITY Positec Power Tools (Europe)Ltd, PO Box 152,Leeds,LS10 9DS,UK Declare that the product, Description WORX Cordless Screwdriver Type WX252 (250-269- designation of machinery, representative of Cordless Screw Driver) Function Tightening and loosening screws, nuts Complies with the following Directives,... - Page 16 Copyright © 2014, Positec. All Rights Reserved. 2CSD05PPK11008A1...