Advertisement
Quick Links
Advertisement
Related Manuals for Worx WX252.1
Summary of Contents for Worx WX252.1
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS WX252 WX252.1...
- Page 4 10 9 8 7 6 5 4 3 2 1...
- Page 5 ON / OFF SWITCH LED SIGHT LIGHT DRIVING BIT Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Type WX252 WX252.1 (250-269- designation of machinery, representative of Cordless Screw Driver) Charger voltage 100-240V~50/60Hz Rated voltage Max* Battery capacity 1.5Ah lion battery...
- Page 6 VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a = 1.113m/s² Typical weighted vibration Uncertainty K = 1.5m/s² The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool...
- Page 7 GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) pow- er tool or battery-operated (cordless) power tool.
- Page 8 before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on.
- Page 9 metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
- Page 10 Recharge only with the charger specified by WORX. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery may create a risk of fire when used with another battery.
- Page 11 SYMBOL Don’t stare directly into the tool holder. To reduce the risk of injury, user must read instruction manual. Warning Wear eye protection Wear ear protection Wear dust mask Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem.
- Page 12 OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The power tool is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. ACTION FIGURE BEFORE OPERATION Charging the Battery NOTE: 1.
- Page 13 TROUBLE SHOOTING Problem Possible cause Solution Battery will not 1. Charger not 1. Plug charger into a working outlet. charge plugged into a work- Check current by plugging in a lamp. ing outlet. 2. Move charger to an appropriate 2. Surrounding air place which temperature is suitable temperature is too for the charger.
- Page 14 Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK Declare that the product, Description Battery-powered Screwdriver Type WX252 WX252.1 (250-269- designation of machinery, representative of Cordless Screw Driver) Function Tightening and loosening screws, nuts Complies with the following Directives,...
- Page 16 LITHIUM ION BATTERY Handle With Care. Do Not Load or Transport Package If Damaged. A Fire Hazard Could Exist. For more information, call: +86-512-65152811 www.worx.com Copyright © 2016, Positec. All Rights Reserved. AR01233000...