Worx WX252 Safety And Operating Manual
Xtd xtended reach driver
Hide thumbs
Also See for WX252:
- Original instructions manual (221 pages) ,
- Manual (153 pages) ,
- Safety and operating manual (17 pages)
Table of Contents
Related Manuals for Worx WX252
Summary of Contents for Worx WX252
- Page 1 SAFETY AND OPERATING MANUAL WX252...
- Page 4 10 9 8 7 6 5 4 3 2 1...
-
Page 6: Technical Data
CHUCK TOP SLIDE COVER FORWARD/REVERSE SWITCH CHARGING INDICATOR BATTERY CHARGING SOCKET ON / OFF SWITCH LED SIGHT LIGHT DRIVING BIT Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Charger voltage 100-240V~50/60Hz Rated voltage Max* Charger rated output current 500mA Battery capacity... - Page 7 ACCESSORIES 5hr charger 25mm screwdriver bits (PH0, PH1, PH2, PZ1, PZ2, SL4, HEX4, HEX5, T10, T20) We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details.
-
Page 8: Work Area Safety
GENERAL POWER TOOL SAFETY WARNINGS shock if your body is earthed or grounded. Do not expose power tools to rain or wet WARNING: Read all safety warnings and all conditions. Water entering a power tool will instructions. Failure to follow the warnings and increase the risk of electric shock. - Page 9 switch is in the off-position before connecting before making any adjustments, changing to power source and/or battery pack, picking accessories, or storing power tools. Such up or carrying the tool. Carrying power tools with preventive safety measures reduce the risk of your finger on the switch or energising power tools starting the power tool accidentally.
-
Page 10: Additional Safety Instructions For Your Battery Charger
GENERAL SAFETY WARNINGS FOR YOUR BATTERY battery packs may create a risk of injury and fire. CHARGER When battery pack is not in use, keep it away from other metal objects, like paper clips, This appliance is not intended for use by persons coins, keys, nails, screws or other small metal (including children) with reduced physical, sensory objects, that can make a connection from... - Page 11 19. Charge only battery pack of the same model Always purchase the correct cell or battery for the provided by WORX and of models recommended by equipment. WORX. m) Keep cells and battery pack clean and dry.
- Page 12 Secondary cells and battery pack need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions. Original Instructions Do not leave a battery pack on prolonged charge when not in use.
- Page 13 SYMBOL Don’t stare directly into the tool Do not expose to rain or water holder. Wear protective gloves For indoor use only Don’t use double end bit To reduce the risk of injury, user must read instruction manual. The output plug is with positive center pole and negative outer Double insulation pole...
-
Page 14: Intended Use
OPERATING INSTRUCTIONS Operation NOTE: Before using the tool, read the instruction Operating the On/Off Switch book carefully. WARNING: Do not operate for See Fig. G long periods at low speed because INTENDED USE excess heat will be produced internally. The power tool is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. -
Page 15: Troubleshooting
TROUBLE SHOOTING Problem Possible cause Solution Battery will not charge 1. Charger not plugged into a work- 1. Plug charger into a working ing outlet. outlet. Check current by plugging in a lamp. 2. Surrounding air temperature is 2. Move charger to an appropriate too hot or too cold place which temperature is suitable for the charger. - Page 16 Copyright © 2014, Positec. All Rights Reserved. 2CSD25APK11002A1...
Need help?
Do you have a question about the WX252 and is the answer not in the manual?
Questions and answers