Grandstream Networks HT818 Administration Manual page 40

Disable Reminder Enables playing the reminder ring. Default is No
Ring for On-Hold
Call
Disable Visual MWI Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is No.
Do Not Escape '#' Replaces # by %23 in some special situations. Default is No.
as %23 in SIP URI
Disable Multiple m
Sends only one m line in SDP, regardless of how many m fields are in the incoming SDP.
Line in SDP
Default is No.
Ring Timeout Stops ringing when incoming call if not answered within a specific period of time. Default
is 60 seconds.
Hunting Group If call is not answered within this designated time period, the call will be forwarded to the
Ring Timeout next member of a Hunt Group.
Default value is 20 seconds.
Hunting Group Specifies Hunting Group Type, either "Linear" or "Circular".
•
Type
•
Delayed Call Forwards incoming call if not answered within a specific period of time when delayed call
Forward Wait forward is activated locally (using *92 code). Default value is 20 seconds.
Timeout
No Key Entry Initiates the call within this time interval if no additional key entry during dialing stage.
Timeout Default is 4 seconds.
Early Dial Sends an early INVITE each time a key is pressed when a user dials a number.
Otherwise, only one INVITE is sent after full number is dialed (user presses Dial Key or
after "no key entry timeout" expires).
This option should be used only if there is a SIP proxy is configured and supporting "484
Incomplete Address" responses. Otherwise, the call will likely be rejected by the proxy
(with a 404 Not Found error). Default is No.
This feature is NOT designed to work with and should NOT be enabled for direct IP-to-
IP calling.
Linear style will sort the call to the lowest numbered available line, this is also called
"serial hunting".
Circular style will distribute the calls "round-robin". If a call is assigned to line 1, the
next call goes to 2 and the next to 3. The succession throughout each of the lines
continues even if one of the previous lines becomes available. When the end of the
hunt group is reached, the hunting starts over at the first line. Lines are skipped if
they are still busy on a previous call. Default is Circular.
HT818 Administration Guide
Version 1.0.9.3
P a g e |
39