Grandstream Networks HT818 Administration Manual page 30

Check New Configure the HT818 to search for the new firmware when the firmware prefix / suffix
Firmware only changes. When this option is selected, the HT818 will check for updates only when the
when F/W pre/suffix has been changed.
pre/suffix changes
Always Skip the
Configures the HT818 to skip the firmware check, when this option is selected the HT818
Firmware Check
will always skip searching for a new firmware.
Disable SIP Disables the SIP NOTIFY Authentication on the phone adapter. If set to "Yes", the phone
NOTIFY adapter will not challenge NOTIFY with 401. Default is No
Authentication
Authenticate Authenticates configuration before being accepted. This protects the configuration from
Conf File unauthorized modifications. Default is No.
SIP TLS Certificate Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT818 has built-
in private key and SSL certificate.
SIP TLS Private Specifies TLS private key used for SIP over TLS is in X.509 format.
Key
SIP TLS Private Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Key Password
Custom Certificate Allows users to update to the device their own certificate signed by custom CA certificate
to manage client authentication.
Enable TR-069 Sets the phone adapter system to enable the "CPE WAN Management Protocol" (TR-
069). Default setting is No.
ACS URL Specifies URL of TR-069 Auto Configuration Servers (e.g., http://acs.mycompany.com),
or IP address.
ACS Username Enters username to authenticate to ACS.
ACS Password Enters password to authenticate to ACS.
Periodic Inform Sends periodic inform packets to ACS. Default is No
Enable
Periodic Inform Sets frequency that the inform packets will be sent out to ACS.
Interval
Connection Enters username for ACS to connect to the HT818.
Request Username
HT818 Administration Guide
Version 1.0.9.3
P a g e |
29