Grandstream Networks HT818 Administration Manual page 25

IPv6 Address Allows users to configure the appropriate network settings on the HT818 to obtain IPv6
address. Users could select "DHCP", "Static IP". By default, it is set to "DHCP".
DHCP hostname Specifies the name of the client. The name may or may not be qualified with the local
domain name. This field is optional but may be required by ISP.
DHCP vendor class Exchanges vendor class ID by clients and servers to convey particular configuration or
ID other identification information about a client.
Default is HT8XX.
PPPoE account ID Defines the PPPoE username. Necessary if ISP requires you to use a PPPoE (Point
to Point Protocol over Ethernet) connection.
PPPoE password Specifies the PPPoE account password.
PPPoE Service Defines PPPoE service name. If your ISP uses a service name for the PPPoE
Name connection, enter the service name here. This field is optional. Default is blank.
Preferred DNS
Specifies preferred DNS server to use when DHCP or PPPoE are set.
server
Time Zone Selects time zone to define date/time on the device.
Self-Defined Time Allows users to define their own time zone.
Zone
Allow DHCP server
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will
to set Time Zone
override selected time zone. If set to "No", the analogue adapter will use selected time
zone even if provided by DHCP server. Default is Yes.
Language
Configures the languages of the voice prompt and web interface, except Spanish that
it is only in IVR. Available languages: English, Chinese or Spanish IVR.
•
DHCP mode: all the field values for the static IP mode are not used (even
though they are still saved in the flash memory.) The HT818 acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
•
Static IP mode: configure IP address, 1
server. These fields are set to zero by default.
Full Static: When enabling the option full static, users need to specify the
-
Static IPv6 and the IPv6 Prefix length.
Prefix Static: When enabling the option prefix static, users need to specify
-
the IPv6 Prefix (64 bits).
HT818 Administration Guide
Version 1.0.9.3
st nd
and 2 DNS server, preferred DNS
P a g e |
24