Print Methods - Flashforge Finder User Manual

7.2 Print Methods

After generating the Gcode file, you can transfer it to your Finder. You can transfer the
file through USB cable and USB stick.
7.2.1 Print from Computer (USB connection)
Connect your Finder with your PC via a USB cable.
Turn on your Finder, level the build plate and load the filament.
Click [Print]
transference, the printer will heat up automatically. And when heating finishes, the
print will start to build the model.
When your PC connects with FlashPrint successfully. The status box on the
bottom right displays the real-time nozzle temperature. After finishing preheating,
your Finder starts the print job directly.
7.2.2 Print from Computer (WiFi connection)
Connect your Finder with your PC via WiFi.(Please refer to 6.1.13)
Turn on your Finder, level the build plate and load the filament.
Click [Print]and transfer your Gcode file to your Finder. After completing
transference, the printer will heat up automatically. And when heating finishes, the
printer will start to build the model.
Finder User Guide | www.flashforge.com
and transfer your Gcode file to your Finder. After completing
7-8
62
400-699-1063