Flashforge Finder User Manual page 17

2.1.4.2Preheat Menus
Finder User Guide | www.flashforge.com
Preheat
Tap the [Preheat] to enter the preheat
interface. Tap the [Start] to heat up to the
setting temperature.
The default temperature is 220 .
Tap the temperature display bar to set the
temperature.
To set the preheat temperature.
Tap [Yes] to save the setting ,
[No] to cancel the setting.
The picture displays the preheat interface. It
shows thereal-timetemperature and the
target temperature. Tap the [Abort] button
to abort the preheat job. Tap [Back] to back
to the previous interface but not abort the
preheat job.
16
400-699-1063