Voltage Selector - Asus Terminator 2 User Manual
Barebone system
Hide thumbs
Also See for Terminator 2:
- User manual (130 pages) ,
- Product manual (122 pages) ,
- User manual (120 pages)
Table of Contents
Advertisement
Power supply unit plugs
6.
Connect the 4-pin power plug to the power connector of the floppy
disk drive.
7.
Connect the 4-pin power plug(s) to the power connector of the optical
drive(s).
8.
Connect the 4-pin power plug to the power connector of the hard disk
drive.
2.10.1 Voltage selector
The PSU has a 115V/230V voltage selector
switch located at the side of the power socket.
Use this switch to select the appropriate voltage
according to the voltage supply in your area.
If the voltage supply in your area is 100-127V,
set the switch to 115V.
If the voltage supply in your area is 200-240V,
set the switch to 230V.
Setting the switch to 115V in a 230V environment will seriously
damage the system!
34
7
1
6
1
Chapter 2: Basic installation
8
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator 2 and is the answer not in the manual?
Questions and answers