OWNER'S INSTRUCTION
22
Function setting - Zone Control
You can turn on/off the zones by used of it.
B
Press
button repeatedly until
icon flash.
Press H I button to select the zone that which one you want to
turn on/off.
K
Press
button to turn on/off zone.
Press H I button to select other zones if you want.
K
Then, Press
button to turn on/off that zone as mentioned
above.
L
Press
button to exit or system will automatically release
without any input after 60 seconds.
C When exiting without pressing set button, the manipulated
value is not reflected.
Function setting - Elevation Grill
This function is to run the elevation grill to clean the filter of indoor unit.
B
V
Press
button repeatedly until
icon is blinking.
K
Move to DOWN using H I button, and press
grill will descend.
When the elevation grill descends to the desired point, move to 'Stop' icon using H I button
K
and press
button to stop the elevation grill.
When filter cleaning is finished, fix the filter to the gill, and move to UP icon using H I button.
K
And press
button to ascent the elevation grill.
L
Press
button to exit after setup.
C If no button is selected for about 60 seconds after setup, it exits the elevation grill mode automatically.
C If Set button is not selected before you exit, the changes will not apply.
• The elevation grill function is available only in the indoor unit with a built-in elevation grill.
OWNER'S INSTRUCTION
23
button. DOWN icon displays and the elevation