LG PQWRCDF0 Owner's Manual
Type : wireless remote controller
Hide thumbs
Also See for PQWRCDF0:
- Owners & installation manual (45 pages) ,
- Owner's manual (253 pages) ,
- Owner's manual (205 pages)
Related Manuals for LG PQWRCDF0
Summary of Contents for LG PQWRCDF0
-
Page 1: Air Conditioner
OWNER’S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : Wireless Remote Controller Models : PQWRCDF0 PQWRHDF0 www.lge.com P/NO : 3828A20580F... -
Page 2: Table Of Contents
Wireless Remote Controller Ownerʼs & Installation Manual TABLE OF CONTENTS ■ Safety Precaution..............3~4 ■ Part Description ..............5~6 ■ Operating Instruction..............7 ■ Installation Instruction............8 - Setting Address of Central Control...........8 - Checking Address of Central Control........8 - How to Enter Installer Setting Mode.........9 - Installer Setting Code Table ...........10 ■... -
Page 3: Safety Precaution
Safety Precautions Safety Precautions • The installation requires expert skills, and it should be installed by the service center or other shops specialized in the installation and recognized by our company. • For all the problems arising after installation by someone who has no relevant qualifications, our company will not provide free service. -
Page 4: Wireless Remote Controller
Safety Precautions Push the button at one time. Do not drop or throw the Do not use this at the moisture There will be no operation if remote Controller. Do not give and Humidity places. you Several buttons at one any strong impact and Put time. -
Page 5: Part Description
Part Description Part Description LCD Screen Slide door(Closed) Wireless Remote Controller Accessory Holder(1EA) Fixing Screw (2EA) Owner's / Installation AAA(1.5V) Manual Batteries(2EA) Ownerʼs & Installation Manual 5... -
Page 6: Operation Mode
Part Description Wireless Remote Controller PLASMA Button (OPTIONAL) Used to start or stop the plasma-purification function. JET COOL Button Speed cooling operates super high fan speed. OPERATION MODE SELECTION Button Used to select the operation mode. FUNCTION SETTING Button Used to set or clear Auto Clean, Smart Clean, Electric heater or Individual vane angle control LCD LUMINOSITY Button (OPTIONAL) Used to adjust LCD luminosity... -
Page 7: Operating Instruction
Operating Instruction Operating Instruction How to insert the Batteries 1. Remove the battery cover by pulling it according to the arrow direction. 2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. 3. Reattach the cover by sliding it back into position. NOTE 1. -
Page 8: Installation Instruction
Installation Instruction Installation Instructions Installer Setting - Setting Address of Central Control With the MODE button pressed, press the RESET button. By using the TEMPERATURE SETTING button, set the indoor unit address. - Setting range : 00 ~ FF Group No. Indoor Unit No. -
Page 9: How To Enter Installer Setting Mode
Installation Instruction Installer Setting -How to enter installer setting mode CAUTION Installer setting mode is to set the detail function of the remote controller. If the installer setting mode is not set correctly, it can cause problems to the product, user injury or property damage. -
Page 10: Installation Instruction
Installation Instruction Installer Setting - Installer Setting Code Table Installer Setting Code Table Function Function Code Setting Value Remote Controller LCD 0 : Set to Master Mode Override 1 : Set to Slave 1 : Standard 2 : Low Ceiling Height Selection 3 : High 4 : Super High... -
Page 11: Owner's Instruction
Owner's Instruction Owner's Instruction Cooling Mode - Standard Operation Press the ON/OFF button. The unit will respond with beep sound. Press MODE button to select Cooling Mode. To raise the temperature Set the desired temperature by pressing TEMP button. Press ROOM TEMPERATURE CHECKING button to check the room temperature. -
Page 12: Auto Operation Mode
Owner's Instruction Auto Operation Mode Press the ON/OFF button. The unit will respond with beep sound. Press MODE button to select Auto Operation Mode. Set the desired temperature. <For Cooling Model> The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. -
Page 13: Auto Changeover Mode
Owner's Instruction Auto Changeover Mode This Function is only available on some products. Press the ON/OFF button. The unit will respond with beep sound. Press MODE button to select Auto Changeover Mode. Set the desired room temperature. ❈ Setting Temp. Range in Auto Changeover Mode : 18~30°C (64~86°F) To raise the temperature To lower the temperature... - Page 14 Owner's Instruction Auto Changeover Mode - Setting the Mode Change Temperature This Function is to set the operating mode of the Auto Changeover Mode. In Auto Changeover Mode, Press the ROOM TEMPERATURE CHECKING button for 3 seconds. The mode change temperature set before will be displayed. Press for 3 seconds.
-
Page 15: Dehumidification Mode
Owner's Instruction Dehumidification Mode Press the ON/OFF button. The unit will respond with beep sound. Press MODE button to select Dehumidification Mode. Set the fan speed. You can select the fan speed in four steps - low, medium, high, or chaos. Each time the button is pressed, the fan speed mode is shifted. -
Page 16: Heating Mode
Owner's Instruction Heating Mode This Function is only for H/P model. Press the ON/OFF button. The unit will respond with beep sound. Press MODE button to select Heating Mode. Set the desired temperature by pressing TEMP button. Press ROOM TEMPERATURE CHECKING button to check the room temperature. -
Page 17: Fan Mode
Owner's Instruction Fan Mode Press the ON/OFF button. The unit will respond with beep sound. Press MODE button to select Fan Mode. Set the fan speed again. You can select the fan speed in four steps–low, medium, high, or chaos. Each time the button is pressed, the fan speed mode is shifted. -
Page 18: Temperature Setting/Room Temperature Checking
Temperature Setting/Room Temperature checking Temperature Setting/Room Temperature checking We can simply adjust the desired temperature • Press the buttons to adjust the desired temperature : Increase 1˚C or 2˚F per one time pressing : Decrease 1˚C or 2˚F per one time pressing Room temp: Indicate the current room temperature Set temp: Indicate the temperature that user want to set <Cooling Mode>... -
Page 19: Airflow Setting (Optional)
Airflow Setting Airflow Setting Up/Down Airflow Direction Control (Optional) The up/down airflow (Vertical Airflow) can be adjusted by using the remote controller. 1. Press the ON/OFF button to start the unit. 2. Press UP/DOWN AIRFLOW button and the louvers will swing up and down. Press the UP/DOWN AIRFLOW button again to set the vertical louver at the desired airflow direction. -
Page 20: Sub Function
PLASMA Purification only If you press the PLASMA button, Plasma Purification operates. • Plasma filter is a technology developed by LG to get rid of microscopic contaminants in the intake air generating a plasma of high charge electrons. This plasma kills and destroys the contaminants completely to provide clean and hygienic air. -
Page 21: Smart Clean (Optional)
Sub function Smart Clean (Optional) The Smart Clean function can be used by setting to manual or automatic. Auto Smart Clean operation If the accumulated operation time of the product exceeds 30 hours, the Smart Clean automatically starts when the unit is turned off. 1. -
Page 22: Lcd Luminosity Control (Optional)
Sub function LCD Luminosity Control (Optional) Press the LCD LUMINOSITY button. It is comfortable when you feel that the display of the unit too bright . Celsius/Fahrenheit Switching Press the °C/°F SWITCH button to change from Celsius to Fahrenheit or from Fahrenheit to Celsius. Whenever press TEMPERATURE SETTING button in Fahrenheit mode, the temperature will increase/drop 2°F. -
Page 23: Individual Vane Angle Control (Optional)
Sub function Individual vane angle control (Optional) It is the function that can control 4 vane angles individually in the ceiling type 4Way cassette product group. Press the FUNCTION SETTING button 3 times. (4 times during heating operation) Individual vane angle control symbol will blink. •... -
Page 24: Timer
Timer Timer Setting the Current Time 1. Press the TIMER button for 3 seconds. 3. Press the SET / CLEAR button. 2. Press TIME SETTING buttons until the desired time is set. NOTE Check the indicator for A.M. and P.M. Timer Setting 1.