Part Description; Owner's Instruction; Standard Operation - Standard Cooling - LG PREMTB001 Owners And Installation Manual

PART DESCRIPTION

6
PART DESCRIPTION
Operation Display
Windows
Sub function Button
Airflow Button
Function Setting Button
Ventilation Button
Reservation Button
Up/Down/Left/Right
Button
Room temperature
Button
ESC Button
Operation Display Windows : Displays the status of operation and settings
Ventilation Button : For interlocking operations of air-conditioner and ventilator
Function Setting Button : To select the additional operations function
Airflow Button : To select the airflows
Sub function Button : To select the additional operations function
Reservation Button : To program the schedule
Up/Down/Left/Right Button : To change the settings in the menu
Room temperature Button : To check the indoor temperature
ESC Button : To exit from the menu
Set/Cancel Button : To save the settings in the menu
Temperature Control Button : To change the desired temperature
Fan Speed Button : To select the fan speed
On/Off Button : To turn on/off with a remote controller
Mode Selection Button : To select the operating mode
Wireless Remote Controller Receiver
Accessories
Connecting Cable Screw (4 EA)
1 EA, 10m
Set/Cancel Button
Temperature
Control Button
On/Off Button
Operation Mode
Selection Button
Wireless Remote
Controller Receiver
Fan Speed Button
Owner's / Inform label
Installation manual (8EA-8Languages)

OWNER'S INSTRUCTION

Standard Operation – Standard Cooling
A pleasant and fresh breeze cools off the room.
2
Press button in the remote controller to begin cooling.
- The initial temperature for cooling is set at 18°C by default.
- The desired temperature can be reached by 1°C or 0.5°C depending on the type of Indoor Unit.
Press button to set the desired temperature below the indoor temperature.
J
- Press button to see the indoor temperature.
C If the desired temperature is set above the indoor temperature, cool air will not blow out but
only fan will work instead.
2
Press button during operation to stop cooling.
What is a 3-minute delay function?
A cool air will not blow out immediately after stopping cooling in order to protect a compres-
sor. After 3 minutes, the cool air will blow out as the compressor runs.
• The range of the desired temperature is 18°C~30°C for cooling.
• 5°C is recommended for the difference between indoor and outdoor temperature.
INSTALLATION INSTRUCTION
7