Sub Function - Himalaya Cooling; Function Setting - Vane Angle Control - LG PREMTB001 Owners And Installation Manual

OWNER'S INSTRUCTION
20
Sub Function – Himalaya Cooling
Only products with Himalaya Cooling function can use this.
C
P P ress button repeatedly until Himalaya cooling
Turn on/off Himalaya cooling function by pressing
C The
icon will be displayed in case of setting option and disappear in reverse case. .
L
Press button after setup.
C If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
C If Set button is not selected before you exit, the changes will not apply.
• Some products may not include Himalaya cooling function.
icon displays.
K
button.

Function setting - Vane Angle Control

You can adjust the angles of air flow.
B
Press button.
B
Press button repeatedly to select the Vane Angles Setting in the menu.
(Vane Number)
(Vane angle set point)
Select the Vane number using H I button.
C Vane Number: No.1, No.2, No.3, No.4, ALL, Standard.
- The selected vane activates. Verify the active vane.
- Select 'All' to program the angle of all the vanes.
- Select 'Standard' to program as the factory default settings.
Select the vane angle using F G button, and press
- The range of vane angles setting can be changed to 5 levels or 6 levels
according to the product.
- When selecting 'Standard' for Vane number, the vane angle does not move.
Program the vane angles for the remaining vanes as the same as above.
C Some products include only No.1 and No.2 vanes.
L
Press button to exit after setup.
C If no button is selected for about 60 seconds after setup, it exits the setup
mode automatically.
C If Set button is not selected before you exit, the changes will not apply.
OWNER'S INSTRUCTION
21
K
button.