Changing The Set Point; Viewing/Changing The Shaker Speed - Fisher Scientific Isotemp User Manual

CAUTION
Fisher Scientific

Viewing/Changing the Shaker Speed

You can view/change the shaker speed value with the bath running or not. From the home screen
press the soft key below
2 0 RPM

Changing the Set Point

The set point is the desired reservoir fluid temperature. You can change the set point with the
bath running or not. From the home screen press either arrow key to display:
When operating without a lid, limit the maximum set point to 60°C.
29.9°C
50.0°C
x
Note After a 30 second delay if neither key is pressed the display returns to the home screen,
not
any change is saved.
to display:
Press, and hold, the arrow keys to bring up the
desired value. The values are 0 and 30 to 200.
Once the desired value is displayed press
or to save the change and return to the
home screen.
Press, and hold, the arrow keys to bring up the
desired set point value. The range is 5°C to 104°C.
Once the desired value is displayed, in this case
50.0°C, press the soft key below
the change or press the soft key below
to not save the change.
Chapter 4
Operation |
(SWB only)
to save
x
4-3
Isotemp |