Using the Web Interface
Logging in to the Web Interface
NOTE
STEP 1
SPA525G (SPCP) User Guide
When your SPA525G is connected to a Cisco Unified Communications 500, you
can use Cisco Unified Communications Manager Express (Cisco Unified CME) in a
web browser to configure some of the features on your phone. This chapter
contains the following sections:
•
Logging in to the Web Interface, on page 60
•
Configuring Speed Dials and Fast Dials, on page 61
•
Changing Your Password and PIN, on page 63
•
Setting Up Voice Mail Notifications, on page 63
Use Internet Explorer version 6 to access the web pages.
Start Internet Explorer and enter the URL for Cisco Unified CME.
The default address is 10. 1 . 1 0. 1 , but your system administrator may change
NOTE
this setting. You can check your Call Manager address by pressing the
Setup button and then choosing Status > Network Status.
5
60