Cisco SPA525G User Manual page 19

Getting Started
Using Phone Hardware and Accessories
SPA525G (SPCP) User Guide
Connecting the Headset
Each brand and type of headset may require different steps for connection.
Consult the documentation for your particular headset for more information. In
general, to connect a headset:
•
For Bluetooth headsets: See the
page18.
•
For wireless, non-Bluetooth headsets (such as Plantronics or Jabra): Connect
the headset's telephone cord into the telephone port on the back of the SPA IP
Phone.
•
For wired headsets: Connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone, as shown in the following
illustration:
"Connecting Bluetooth Headsets" section on
1
17