Pre-Tare Function - KERN FCF 3K-4 Operating Instruction

Delete tare
PRE-TARE
function
Delete PRE-TARE
value
FCF-BA-e-1611
 Weigh the material, the net weight will be indicated.
The taring process can be repeated any number of times,
e.g. when adding several components for a mixture
(adding). The limit is reached when the whole weighing
range is exhausted.
After removing the weighing container, the weight of the
weighing container appears as negative display.
The tare weight is saved until it is deleted.
 Unload the balance and press
appears.
Using this function the weight of a tare vessel is stored. Even
after turning off/on the weighing balance will continue working
with the saved tare value.
 In weighing mode put tare vessel on the weighing plate
 Press
repeatedly until „PtArE" will appear flashing.
 Use
to save the current weight on the weighing plate
as a PRE-TARE value.
 Remove all loads from the balance and press
repeatedly until „PtArE" will appear flashing.
 Acknowledge with
the zero display appears.
47.2
g
, the zero display
0.0
g
. The PRE-TARE value is deleted,
13