Dosing and
The Auto-Zero function is used to tare small variations in weight
Zero-tracking
automatically.
In the event that small quantities are removed or added to the
material to be weighed, incorrect weighing results can be
displayed due to the "stability compensation". (Example: Slowly
draining fluids from a container on the balance).
When apportioning involves small variations of weight, it is
advisable to switch off this function.
If Zero-Tracking however is switched off, the weighing display
becomes more busy.
0.0
Keep pressed
g
Vn� T
Press
Tl
Acknowledge using
Select desired setting by
Acknowledge selection by
24
displayed.
repeatedly until "tr" is displayed.
tr on
Function activated
tr off
Function deactivated
in weighing mode until "Unit" is
, the current setting is displayed.
.
.
FCF-BA-e-1611