Net-Total Weighings - KERN FCF 3K-4 Operating Instruction

Net-total
weighings
16
It is useful if a mixture of several components is weighed into a
tare vessel and finally the sum weight of all weighed
components is necessary for control purposes (net-total, i.e.
the weight of the tare vessel).
Example:
1. Place tare container on the weighing plate; press
the zero display appears.
2. Weigh-in the component . Press
appears. [] is displayed on the right border of the display.
3. Weigh-in the component , press
weight of the components  and ) is displayed.
4. Press again, the zero display appears.
5. Weigh-in the component , press
weight of the components  and  and ) is displayed.
 If necessary, also fill the formula up to the desired final
value. For every component more repeat the steps 4-5.
 Back to weighing mode by pressing the
,
, the zero display
. Net-total (sum
. Net-total (sum
button.
FCF-BA-e-1611