Connecting A Programming Device (Pg) To The M7-400 - Siemens S7-400 Installation Manual

8.7.3

Connecting a Programming Device (PG) to the M7-400

Connecting a Programming Device (PG) to the M7-400
You can connect the programming device via a preassembled programming device
cable to the MPI of the CPU.
Alternatively, you can fabricate the connecting cable with the PROFIBUS-DP bus
cable and bus connectors (see Chapter 5).
Shown in Figure 8-17 are the components for connecting a programming device to
the M7-400.
Figure 8-17
S7-400 and M7-400 Programmable Controllers Hardware and Installation
A5E00069481-04
M7-400
PG cable
Connecting a Programming Device to the M7-400
Assembling the M7-400
Programming
device
8-39